Відео

Thanks, gonna need that if things get worse

Just done this on my 2011 UK model C30 and was identical to yours. The reason I needed to remove mine was obviously somebody had been in there previously and did not line the top clips up correctly as you pointed out, so the top edge of the door card had a hump in it. So many thanks for posting this.

2010 This Does NOT work

93 for rangers are different

I had no idea it was so easy! This will be way cheaper than getting it changed at the shop. Thank you :)

I tested the temp sensor like you said on 6 different cars, same amf types, i get no readings whatsoever, bo sound when doibg the beep test, am i doing it wrong or are they all broken.

1 and 3 are the exact same thing

very informative. This helped me repair my 97 explorer today. Thank you for the very good video details.

This video shows how to replace the headlight HOUSINGS not just replace the bulbs. Obviously! Great video.

Awesome video. I have a 1961 Dodge Lancer that sat in a field in North Wa. for over ten years and the drums are stuck. I will try these tips tomorrow!

great work man

I have a '98 Tacoma, the radio stopped working (I think a rodent might have chewed a wire because it stopped working overnight), this is a great video and I feel confident to go forward and remove it because of your video. Just one question, what is the unit you're replacing the old radio with?

My fob dead on me have to buy a new one, after watching this video now I can do this my self 👍

will panel wipe work ?

You guys always demo the easiest sensor to remove. Try bank 2 on a ‘99 GMC Safari van. They are near impossible to even get to.

Thank you very much sir.

So my power steering went out so I fixed my pump checked all the houses tie rods everything else looked fine made sure no air was in the system then a couple days later my steering starting tightening up then it breaks free and it’s off and on any know what could be the problem?

Thanks

Thank u so much for this video.very helpful video for me

Excellent, Excellent, Excellent! We changed out the left rear window regulator on a 2008 E90. Upon completion, the window would touch the top and roll back down to half open. The automatic close function did not work either. This simple procedure fixed our problem. The key was the 15 second hold, others stated 5 seconds, which is not correct.. Many thanks!!! AAA++++

No converted surface will be as secure as the raw metal. No resin will adhere as well as POR15 over sandblast.

This is the most common method, but fiberglass is to brittle for a lasting repair. If you can sandblast POR15 with glass cloth will last much longer.

Remove this with a polisher to impress the customer and finish the buff by hand. Then do the windows and send them on their way!

I just glued mine in

Will this really work? it won't open somewhere

Well done! I watched your video to get my head back in the game. One of the most professional "shady tree" demonstrations I've seen, here. The coolant flush/add system by OEM Tools is certainly on my radar, now. I like the idea of being able to watch the level above the radiator and not have to worry about a messy dismount, afterwards. For viewers who want the fan off, first: O'reilly's has a fan removal tool (By "Lisle") on the shelf for ~$30 (part #: 43580), that fits this truck (mine, 2007 Dodge Ram 1500 5.7L). They do carry the rental tool, as well; I didn't bother with that gamble. I've read that Advance Auto's rental tool DOES for sure contain the correct attachment, but sticking to one store was a goal for me. I confirmed the fitment of the "shelf" tool from O'reilly's while my truck was still in the parking lot before purchasing.

THANK YOU SIR

Mine is the same but one side gets tight and wont set into place and the other gets loose…lol

Pretty good result..

For others doing this, if you have a ratcheting wrench, you don't have to remove the whole driveshaft and you can save some time. Loosen the connecting bolt for the two halves first with a normal wrench. Then use a ratcheting wrench to speed things up. wrench will be stuck in place when the bolt is backed out. Then do the 3 guibo bolts. Support the back half of the driveshaft with a jackstand and slide the front half off. Came here to get the correct orientation since I split this project between 2 days haha, you rock! Thanks!!

Why cant i find a video of people doing fucking 9 inch brakes, these are 10, wheres the little mounting bracket the adjustment lever spring hooks on to

It’s scary how most people don’t even think to inspect the frame for rust when buying a used car!! And if you go back in time just a few months I’m also talking about myself! Now I’m obsessed with frame condition. So I just looked at about 3000 photos while looking to buy a used car…NOT ONE photo of a frame yet. Currently I’m eyeing up this 2007 Corolla, the original owner had it until 2020 and lived in snowless GEORGIA!!! ❄️

I changed my oil but they gave me 75w 140 but my ram feels like it is heavier and loses speed, it could be because of the oil.

Great video.

Is this the same way as taking it off a touring ?

So what exactly is the symptom?

The video is excellent. I tried putting those contact back into the slot(?) they were unstable but worked on this for three hours trying to get it put back together. I regret beginning this odyssey going to try again but already have searched for a replacement. You have to have the patience of an angel in my opinion to do this yourself.

It was a relay and not the radiator fan. Thanks

Would using one of those cigarette lighter headlights be good as a hard wired to battery ones? Would this be safe to use all day as a headlight, (does it get too hot or cause electrical issues in your car)?

IF you can move it back and forth. Lol When you gear the creaking spray it with penatrating oil.

Best fibreglass tutorial on yt..Bravo dude!

Hello! This amp looks like the Kenwood KAC-M1814? If so I just bought this one too! And I’m looking to bridge the connections so I can power 2 kicker speakers! Can you tell me how to bridge them? I emailed Kenwood and they gave me different info than the manual.. haha

Hello, Im living in Texas. Do you think it street legal here?

WD-40, let it soak, he mentioned that but skipped over it. Even a shot here would work wonders.

That tube of Deoxit costs £77 in the UK (equivalent to $96)

Hello, on the taillights on the tailgate are both light bulbs replaceable or is it just the reverse light bulb the only one? I ask because I went to autozone and showed them pic of what I needed and they told me that the reverse lights are the only one that can be replaced and that if its the red lights I would have to replace the whole house and now I'm confused.

9yr old vid and still top link on yt. Exellent tut. Not excessively wordy at 12 mins like someone else suggest. Just fully explained.

Dädschd a besser uffhere

I going to trie on my ram van conversion 1999

Thank you